How to Fix the Nissan P0335 Error Code

OBD Codes

By Rodney (Mechanics)

Nissan P0335 error code is one of the issues that usually occur in Nissan and it happens to a large number of Nissan owners. It shows that circuit of the crankshaft position sensor is not in an appropriate state. This sensor resembles the role of measuring rotation speed and position of the crankshaft. The crankshaft is placed at the center of the engine and hence crucial for the engine to run smoothly. In the event of a sensor breakdown, engine ignition may not take place, it will stall or its performance will be poor.

In this article, you will learn a lot of things from what makes the Nissan P0335 often seen to what causes this error code, how to diagnosis it, how to fix it, and many others.. You will also find some frequently asked questions and answers about this issue. By the end of this article, you will have a better understanding of how to deal with the Nissan P0335 error code and prevent it from happening again.

2005 Nissan Frontier Crankshaft Position Sensor Replacement

What Causes the Nissan P0335 Error Code?

The Nissan P0335 error code can be caused by various factors, such as:

  • A damaged obstruction of crankshaft position sensor.
  • A defective or Indian harnessing and connection may be the cause of the problem.
  • An improper earthing of ground or supply voltage may lead to the tripping of the circuit.
  • A worn timing belt or thing chain are one wastage.
  • Malfunction of an electronic control module (ECM)

The main reason for detection of a crankshaft position sensor failure is P0335 Nissan error code. This sensor may be defective due to mechanical damage, thermal (heat) liquids effects, or the presence of particles similar to dirt and oil in the working environment. An erroneous data from the sensor may be the reason behind the error code message, which, in turn, consists of both sporadic and wrong signals.

How To Fix the Nissan P0335 Error Code

How to Diagnose the Nissan P0335 Error Code?

To diagnose the Nissan P0335 error code, you will need a few tools, such as:

  • A code reader or scanner
  • A digital multimeter
  • A repair manual for your specific Nissan model

The process starts with the error light blinking faster or activating specially programmed scanners to confirm the error code and reset it. Then, you can follow these steps to diagnose the problem:

  1. At the Nissan, specify where to find the crankshaft position sensor. It is situated in the center of the engine and is linked to the strength behind the drive shaft or flywheel. Using your instruction manual, go to the exact location as well as a close-up picture of the sensor.
  2. Perform a visual inspection of the sensor and the wiring harness for any pretexts of the damage, corrosion or loose connection. If the damaged started is discovered, restore or replace them accordingly.
  3. In this step, disconnect the sensor connector and check the resistance of the sensor which will be measured by multimeter. The resistance should not exceed the value nor should be below the specification given in your repair manual. When the resistance is too much or the wrong level, then the sensor is bad and needs to be thrown away.
  4. Give the multimeter a try and verify the volts and grounding of the sensor circuit. And the ground should be good. The voltage has to be at around 5 V. Provided that Fig. 1 shows no such abnormality, one can infer by the presence or absence of voltage and ground (i.e. whether or not they are normal), that there is a problem with the wiring, the connector, or the ECM.
  5. Plug in the sensor again and power up the engine. Run the waveform through a multimeter or an oscilloscope to view the waveform of the sensor signal. Be sure that you have a stable and waving pattern which is exactly in accordance with the specifications given in the repair manual. An oscilloscope helps identify faulty sensors since a display of a clear waveform shows that the sensor is operating normally while a missing or erratic shape indicates the need to replace them.
  6. If the sensor is in operation and the circuit is working well, the timing belt may be the cause of the problem. While inspecting, ensure that the timing belt/chain is in a good shape, is not worn off, be broken, or missed. If it is, replace or adjust it as needed.
  7. If the timing belt or chain is also good, the problem may be with the ECM. The ECM is the computer that controls the engine and receives the signals from the sensor. If the ECM is faulty, it may not process the signals correctly and cause the error code. At this stage, the ECM tester might require an OBD II scan tool, a technician and other equipment related to diagnosing drive or emission issues.

How to Clear the Nissan P0335 Error Code

How to clear up a P0335 error code in your Nissan?

Here are some tips on how to fix the Nissan P0335 error code:

  • It’s important that you disconnect the negative battery cable before removing any component to make sure you won’t get electric shocks or damage.
  • For the replacement of the crankshaft position sensor, find the OEM part which specifically suits the Nissan model and ensure to go with the directions mentioned in your maintenance manual. Depending on the location of the sensor, certain structural elements like the crankshaft pulley or the flywheel might need to be taken away before the sensor could be reached.
  • When you replace the wiring harness or connector, you ought to be te given the right kind and size of wires and connectors and will actually make sure you do them according to the guide or instructions. In this case, you have to look at the wiring diagram to make sure of the wire and its function.
  • Take special note that when you are replacing the timing belt or chain, use the right type of belt or chain and get it aligned with marks at the crankshaft and camshaft sprockets. While swapping the drive belt or chain, you may need to get a special toothed tool to lock down the crankshaft and the camshaft.
  • When replacing the ECM, make sure you use the correct part for your Nissan model and follow the instructions given in your repair manual. You may need to reprogram the ECM with the scan tool and the latest software update from Nissan.

How to Prevent the Nissan P0335 Error Code?

Some of the maintenance tasks that can help prevent the Nissan P0335 error code are:

  • Change the engine oil and filter every 5,000 miles or as specified by your Nissan manual. This will keep the engine clean and lubricated and prevent dirt and oil from contaminating the sensor.
  • Replace the spark plugs every 30,000 miles or as specified by your Nissan manual. This will ensure optimal combustion and performance and prevent misfires and rough idling.
  • Replace the air filter every 15,000 miles or as specified by your Nissan manual. This will improve the airflow and oxygen supply to the engine and prevent dust and debris from entering the sensor.
  • Inspect the serpentine belt every 60,000 miles or as specified by your Nissan manual. This will prevent the belt from slipping or breaking and affecting the engine timing and the sensor signal.
  • Check the timing belt or chain at least every 90,000 miles OR as indicated by your nennan manual. This will eliminate the chance of the belt or chain from suffering damage or wearing which could cause the engine time and to jump and a subsequent error code.

What Do the Error Signs of the Nissan P0335 Error Code Point To?

The P0335 error code for Nissan is responsible for the various symptoms which can have unfavorable effects on the performance, fuel management and exhaust release of your Nissan. Some of the common symptoms of the Nissan P0335 error code are:

  • The “check engine” light has come on.
  • Or the key turns in the ignition but nothing happens even though one can still hear the click-click sound.
  • The engine stops working during driving; or, it constantly stuttering off while I am driving.
  • The car fire out or the engine was knocking.
  • It has broken or slow to get up to its top speed.
  • The engine has poor fuel economy or increased emissions
  • The engine makes rattling or knocking noises

If you notice any of these symptoms, you should scan your Nissan for the error code and fix the problem as soon as possible. Driving with the Nissan P0335 error code can cause further damage to your engine and other components.

How to Clear the Nissan P0335 Error Code?

To clear the Nissan P0335 error code, you will need a code reader or scanner that can communicate with your Nissan’s ECM. You can buy one online or at an auto parts store, or you can borrow one from a friend or a mechanic. You can also visit a local auto shop or a dealership and ask them to clear the code for you, but they may charge you a fee for this service.

The Nissan P0335 code clear the error code is clear with the code reader or scanner, please follow this step:

  1. Refer to the owner’s manual from where you can locate the OBD-II port on your Nissan. There it usually sits near a steering wheel column and driver side door on the passenger’s side under the dashboard. After referring to the section with a specific owner’s manual, this is the place you locate it and how it looks like.
  2. Simply attach the code reader or scanner to the port OBD II, and then turn on the device. The machine must utilize energy from either the fueling of the ignition or the engine kicking off in order to create power.
  3. Look at the device’s display to read the instructions and scan your Nissan for the error code. You should have the Nissan P0335 error code and its description appeared on the screen.
  4. Press the erase or clear button on the device to clear the error message. When done, there should be a message confirming that the code is clear.
  5. Off-the device and unplug it from the OBD-II port. You might shut off the ignition or totally stop the engine.
  6. Press the gas pedal and drive your Nissan for a while. See if check engine light is ok and the symptoms are gone. If the error code does not come back, it means the problem is fixed. If the error code comes back, it means the problem is not fixed and you need to diagnose and fix it again.

FAQs

Here are some of the frequently asked questions and answers about the Nissan P0335 error code:

How much does it cost to fix the Nissan P0335 error code?

The cost to fix the Nissan P0335 error code depends on the cause and the component that needs to be replaced. The average cost of replacing the crankshaft position sensor is between $100 and $200, including parts and labor. The average cost of replacing the wiring harness or connector is between $50 and $100, including parts and labor. The average cost of replacing the timing belt or chain is between $300 and $600, including parts and labor. The average cost of replacing the ECM is between $500 and $1000, including parts and labor.

How do I know if the Nissan P0335 error code is fixed?

The Nissan P0335 code clear the error code is clear with the code reader or scanner, please follow this step:

  1. Refer to the owner’s manual from where you can locate the OBD-II port on your Nissan. There it usually sits near a steering wheel column and driver side door on the passenger’s side under the dashboard. After referring to the section with a specific owner’s manual, this is the place you locate it and how it looks like.
  2. Simply attach the code reader or scanner to the port OBD II, and then turn on the device. The machine must utilize energy from either the fueling of the ignition or the engine kicking off in order to create power.

This simple trick will allow you to tell if your Nissan P0335 error code is fixed. Just use the code reader or scanner to erase the error code and then drive a bit with your Nissan. Otherwise, no error code appears thus indicating that the issue is resolved. If you’re still getting the same error code, it means the problem has not been solved yet, and you should once more figure out the issue and fix it.

Can I still drive my Nissan with the P0335 error code?

If you have the P0335 error code on your Nissan, you may still drive, but it is not at all recommended. The P0335 error code for your Nissan will bring about poor performance of the engine, reductions in fuel economy, extra emissions, and even possible damage to the engine, if not addressed while on the road. In addition, it is the basis of your car failing the state inspection or emission testing. As a result, promptly fix the problem and then never drive your Nissan with this P0335 code error.

Similar error codes to the Nissan P0335 error code are:

  • P0336: The Crankshaft position sensor B circuit range/performance cannot be covered here in much detail.
  • P0337: Crankshaft Position Sensor B Circuits, Low Input Voltage.
  • P0338: Crankshaft Position Sensor B Circuit High Input
  • P0339: Crankshaft Position Sensor B Circuit Intermittent
  • P0340: Camshaft Position Sensor A Circuit Function Malfunction
  • P0341: Camshaft Position Sensor A Circuit Distance/Competence Range
  • P0342: Camshaft Position Sensor A Circuit Low Signal.
  • P0343: Camshaft Position Sensor ‘A’ Circuit High Input
  • P0344: CPS (Camshaft Position Sensor) A Circuit is Intermittently Operational.

Such error codes indicate that either the camshaft position sensor or its circuit is problematic, as these are related to the crankshaft position sensor and the engine timing. Just like the Nissan P0335 error code, this one also needs to be fixed in the same way.

For fixing the Nissan P0335 error, you may need to identify and replace or fix the part that is malfunctioning. Based on the fault, you may need to sub the crankshaft position sensor, the wiring harness or connector, the timing belt or chain, or the ECM. On top of that, you have to clear the code with the code reader or scanner after mending the mistake.

The most effective method to avoid the Nissan P0335 error code is the maintenance of the vehicle routinely and following the service schedule recommended. In addition to that, you should get the condition of the crankshaft position sensor, the wiring harness, the timing belt or chain and the ECM checked periodically and replace them if they show signs of being worn or damaged. As a result, you will be able to prevent the Nissan P0335 error code and ensure that your Nissan will serve you for many years to come.